Free To Good Home

Stock front pegs and mounts

feeds@yuku.com (bamaTrider) — Tue, 06 Oct 2009 19:09:37 GMT

I still have my stock front pegs and mounts. The R peg is missing the chrome lower cover that attaches to the peg end and bottom (still available from Honda and Ron Ayers). I heard a pling, pling, pling coming home from work 1 day but could not figure out what it was right away. Two days later I discovered it missing while cleaning the bike.

Free + actual shipping to any continental US state.

Stan

Rubber for floorboards or?

feeds@yuku.com (gordonv) — Sun, 20 Sep 2009 15:40:21 GMT

Hi fellow members.

I had to buy a 2'x2' sheet of rubber matting to replace the rubber from my floorboards when the glue didn't hold and they blew away. I've repaired mine, but now don't want to keep more than I need for an extra set.

If someone else wants some, all I need is the cost of shipping, which I have no idea how much that would be yet, along with the size you require (I used approx 4"x20" for 2 boards) then I'll be most happy to...

Jeweled fender bolts

feeds@yuku.com (Rabbi Glenn) — Thu, 02 Apr 2009 08:24:27 GMT

I still have a small handful of the jeweled or chrome fender bolts, which look nicer than the stock bolt. They're doing me no good sitting in my garage, so let me know. See my photos - if I recall, I think I've got one that shows the item close up.

STOCK SEAT...like new

feeds@yuku.com (kcroadrocket) — Sat, 07 Feb 2009 08:24:48 GMT

i'm trying to clean shop a little and have the stock seat (both pieces) off my T that i'll never use. it's in perfect condition. you pay shipping, and it's yours!
bud

stock seat minus pan

feeds@yuku.com (Joe Schmo) — Sun, 21 Dec 2008 09:10:51 GMT

I bought a mustang seat for my T, but didn't realize it didn't fit a tourer....(careful on descriptions on e-bay)
an upholstery working friend was able to adapt so I kept it.
The stock seat and cushion have no rips ,scuffs or the like .......... yours for the cost of shipping!
Schmo

TAKEN: Progressive 440 Shocks - 12" length

feeds@yuku.com (Marpesia2) — Wed, 29 Oct 2008 00:50:50 GMT

Thank you for your interest in these shocks, but they have been taken.

These are the Progressive 440 shocks that have been popular on this forum, in the 12" length (NOT the 11.5" length) listed by Progressive for the T.

These shocks are my second set on this bike, replaced for free after the first set failed within two years (apparently I ride hard). This second set spent less than a year on the bike, and the coil springs show a little...

Chrome eagle ornament

feeds@yuku.com (Laura) — Sun, 21 Sep 2008 13:37:03 GMT
Chrome eagle for your fender. Includes gasket and mounting bolts. In very good condition. Retails for around $28.00 - you pay to ship.

Laura

Stock foot pegs with mounts

feeds@yuku.com (Jay Jackman) — Fri, 22 Aug 2008 22:23:36 GMT
Stock foot pegs with mounts. Shipping will be from Canada and they are fairly heavy with the mounts, so keep this in mind if you want them.

alarm

feeds@yuku.com (kcroadrocket) — Tue, 19 Aug 2008 12:51:53 GMT
i bought this alarm on ebay and could never get it to work. finally discovered the siren/horn didn't work. i hooked it direct to a battery and nothing! so, that may be the only thing wrong with it and if it is, you could always get another horn/siren or hook it to your existing horn....i just got tired of messing with it. comes with instructions, but think a foreigner wrote them, 'cause they are very confusing, and i'm not an electrical guru.
think i gave around $40 bucks...

Rear seat, and a mirror

feeds@yuku.com (bamaTrider) — Sun, 15 Jun 2008 00:07:00 GMT
I have a factory rear pillion seat for most of the VT1100's. Came from a Tourer. It has a small tear (about 3/4" long) on the very back edge next to the Honda decal. I was going to use it to see if I could modify it wider for more comfort., but never got around to it. Pay shipping and it's yours.

Also have a factory mirror. Fits L or R side. Not perfect chrome but still shiny. Yours for the cost to ship.....should be less than $5 to ship most places.

...

OEM Front Seat

feeds@yuku.com (osp1474) — Wed, 11 Jun 2008 17:46:43 GMT
I have a stock front seat that I need to get rid of. The back is gone. I'll post it here for a week and then it goes with the "G man". If you want it let me know. It's in good condition with no tears or blemishes.

Thanks,
Nate

Seat cover (claimed)

feeds@yuku.com (eclecticdawn) — Tue, 01 Apr 2008 14:42:58 GMT
I've just reshaped and recovered my seat, but we kept the original seat cover in one piece when we removed it.

It's got a few scuff marks on it, but no tears or rips. If anyone (in the continental US, please), would like it, I'll be glad to mail it to you.

Hello,

feeds@yuku.com (ramblnman64) — Sat, 02 Feb 2008 23:08:27 GMT
Jus wanted to say hello, seems like you have a very nice community here. I'm in the army and currently in Iraq due home in April. I just purchased my 99-T and will be looking for a lot of info on it and extra goody's.

David

Cobra 04-8997 Lightbar Replacement Bullet Spotlight Bulbs

feeds@yuku.com (GaleRich) — Sat, 29 Dec 2007 10:52:48 GMT

I cleaned out my desk and found lots of "stuff". I don't know why I kept some of the crap I found. What good is an old 1200 baud PCMCIA modem anyway! I did find these two brand new light bulbs that I had incorrectly ordered some time ago. If anyone has need of these, their yours ... free of charge. Shipping via a bubble pack is probably well under $2.

I think I'll make a years resolution to keep my desk drawers clean!

Freebie

feeds@yuku.com (Triderhouston) — Thu, 15 Nov 2007 00:42:26 GMT
Got your attention huh ?

Well , heres the deal . Our little Fox Terrier Millie has had babies . We are not sure what got to her , but they look just like her . They might be purebred , or mixed . If mixed we think it is either a Chihauhau or a Jack Russel that got her in the family way . We are expecting to...

Striped Snake "patch"

feeds@yuku.com (mike2000t) — Sat, 13 Oct 2007 14:48:40 GMT
I had mentioned that I was going to do a "patch" for anyone who wants one. Please let me know if you think I need to change anything. This will end up being an embroidery design that I will email to anyone who wants it, and anyone with a commercial embroidery machine should be able to run it, so technically, it is not a patch.

Mike

almost free seat and pipes...you pay s/h

feeds@yuku.com (imrocky25) — Wed, 05 Sep 2007 17:06:37 GMT
OEM Seat for '98 Ace T - No rips or tears...upgraded to Corbin

OEM pipes for same bike - minor scratches on tips...from backing up to curb and scuffing (swearing was heard shortly after).

I will drop them off to the nearest pack and ship...you pay to have them box and ship (or you can pick up - in either Grand Rapids Michigan or Goshen Indiana.

I am moving and have them hanging in my garage...and I will either trash them...or you will want them. They are...

Stock Risers Available

feeds@yuku.com (GaleRich) — Fri, 20 Jul 2007 08:42:30 GMT
I changed the handlebar risers to raise them and pull them back a few inches. I don't think I'll ever revert back to the originals. If anybody wants a stock set, you are welcome to them (speak now before I forget where I put them!).

- Rich

looking for saddlebags,

feeds@yuku.com (nick jornet) — Sat, 14 Apr 2007 15:42:41 GMT
Looking for saddlebags any year or color.
Thanks

Passenger sissy bar pad **GONE**

feeds@yuku.com (NC tourer) — Thu, 22 Mar 2007 20:30:52 GMT
I have a hondaline sissybar pad in near perfect condition. Free to first person needing it.

it found a home..