| Author | Comment | |||
|---|---|---|---|---|
 greyaero |
Tank Badges |
Lead | ||
|
HSATF Member
Posts: 42 06/20/08 9:34 AM |
The tank badge on the left side is lifting off the tank. Not much but enough that something could catch on it and make it worse. It's lifting on the narrow
end (towards the rear of the bike)
How are the badges fastened to the tank? What's a good fix? |
|||
|
|
||||
 ragtop69gs |
#1 | |||
|
HSATF 1st Officer
Posts: 981 06/20/08 9:43 PM |
I believe they are attached by double sided tape. A heat gun and fishing line will get it off to replace the tape. You can get 3M double sided trim tape at
most auto paint stores, cut to fit and you're good to go. Don't forget to mark the bsdge location with some masking tape B4 removal.
Jay
Patriot Guard Rider http://www.patriotguard.org/ 98' T Black & Chrome 69' Buick GS 400 Conv. " Never ride faster than your angel can fly" "Ask the American Indians what happens when you don't control immigration"
|
|||
|
|
||||
|
greyaero |
#2 | |||
|
HSATF Member
Posts: 42 06/20/08 11:33 PM |
Thanks for the info Jay. I'll give it a try
|
|||
|
|
||||
