| Author | Comment | |||
|---|---|---|---|---|
 rod rounds |
My oil filter is BIGGER than yours is, My oil filter is BIG........... |
Lead | ||
|
HSATF Tail Gunner
Posts: 136 03/09/08 7:34 PM |
The stock oil filter is 67mm O.D. X 66.7mm Long The filter that i put on today is 77mm O.D. X 103.2mm long I now have a filter that is BIG enough for my peace of mind. I think this is the biggest one that will fit my T, it went on with no problems on my bike, i could get a larger(o.d.) filter to fit but i could not find one that was not to long for my T. ROD
|
|||
|
|
||||
|
bamaTrider |
#1 | |||
|
HSATF 1st Officer
Posts: 3702 03/09/08 8:25 PM |
Which one did you buy?
Stan
"We are different - yet we are the
same"
2004 GL1800 Goldwing (Titanium) 1999 Ace Tourer (Silver over Black) |
|||
|
|
||||
|
rod rounds |
#2 | |||
|
HSATF Tail Gunner
Posts: 136 03/09/08 11:40 PM |
I'm not telling!
ROD Baldwin B161-S (4 1/16" long) Roger has an '99 or 2000 T and he could not get the B1431(4" long)to fit. My bike is stock and can fit this big of a filter on it. go figure
|
|||
|
|
||||
|
dukey33 |
#3 | |||
|
HSATF 1st Officer
Posts: 676 03/10/08 8:42 AM |
compensating for something?
but seriously, on my last oil change I used the PureOne PL14610 and there is not much space left. In fact, I won't be able to use the cap-style filter wrench to remove it. Not enough clearance.
duke
loud horns save lives |
|||
|
|
||||
|
rod rounds |
#4 | |||
|
HSATF Tail Gunner
Posts: 136 03/10/08 1:31 PM |
Yes, i hate little oil filters. I put oversize filters on all my vehicles, you get better filtration with a larger filter, the slower the oil passes through
the filter the better it works. No, you will not be able to use your wrench, but i just use my hand or a pair of Channellocks to take it off, I always use my
hand to put the filter on. I have not gone to the auto store to look at filters(PureOne, Fram, M1, Bosch) yet, but this filter(B161-S) is off an 1986 Mazda 626
4 cyl-2000cc (2.0L) FI or Turbo, and its big. I wish i could put the stock filter next to my new filter and post a pic, but the new filter is on my bike. Also
let me say this, "THIS FILTER MIGHT BE TO BIG FOR YOUR BIKE" not to big for mine but i have to say that or someone will buy a case and for some
reason they will not fit. Anyway i got my(biggest that fits my bike) filter now and thought i would share.
ROD
Last Edited By: rod rounds 03/10/08 1:35 PM.
Edited 2 times.
|
|||
|
|
||||
|
rod rounds |
#5 | |||
|
HSATF Tail Gunner
Posts: 136 03/10/08 7:36 PM |
This filter(B161-S) also fits,
JOHN DEERE Excavators 27D ZTS 27D ZTS w/Yanmar 3TNV88 Eng. JOHN DEERE Lawn & Garden Equipment F1145 Front Mower F1145 Front Mower w/Yanmar 3TN75 Eng. JOHN DEERE Lawn & Garden Equipment F1145 Front Mower F1145 Front Mower w/Yanmar 3TN78 Eng. JOHN DEERE Tractors 1050 1050 JOHN DEERE Tractors JD650 JD650 w/Yanmar Eng. JOHN DEERE Tractors JD750 JD750 w/Yanmar Eng. JOHN DEERE Tractors JD850 JD850 JOHN DEERE Tractors JD855 JD855 w/Yanmar 3TN75 Eng. JOHN DEERE Tractors JD900HC JD900HC So you see my bike does run like a Deer, a John Deere ! 
ROD
Last Edited By: rod rounds 03/11/08 6:23 PM.
Edited 2 times.
|
|||
|
|
||||
|
alepel |
#6 | |||
|
Posts: 7800 03/10/08 9:23 PM
|
Oh Dear!
alepel
"Ride with the Spirit always, and in all ways"....hombldr |
|||
|
|
||||
|
rod rounds |
#7 | |||
|
HSATF Tail Gunner
Posts: 136 03/12/08 3:58 PM |
For those of you that like Wix filters, Wix makes two of the big filters, p/n 51344 that is 4.069" tall and 3.242" o.d. with an By-Pass Valve
Setting-of 8-11 psi, and p/n 51568 that is 4.072" tall and 3.234 o.d. with an By-Pass Valve Setting-of 16 psi. These are BIG filters and may not fit your
bike, but if they do, they will filter more oil, filter the oil better and last longer. These will fit my "T" but Roger(Mountain Tourer) could not
get the 4" tall Baldwin B1431 on his "T". I don't know what the difference is between our two bikes, his is still snow-bound so when i see
him next, that is going to be the first thing i look at.
ROD
|
|||
|
|
||||
